SBND scientists complete assembly of large neutrino detection system – Technology Org

After four years, the assembly of a new neutrino detection system — about the size of a small, two-story house — at the US Department of Energy’s Fermi National Accelerator Laboratory is complete. Built for the Short-Baseline Near Detector, the system will be moved across the Fermilab site from the assembly building to the detector hall in a few weeks.

The light detection systems of the Short-Baseline Near Detector comprise silicon-based devices as well as traditional photomultiplier tubes. Photo: SBND collaboration

Neutrinos are mysterious particles that could hold the key to answering many questions about our universe. Scientists have discovered three types of neutrinos. Results from some experiments suggest there might be more. As part of Fermilab’s Short-Baseline Neutrino Program, SBND will be one of three detectors to examine the behavior of neutrinos. Together, the detectors will measure short-distance neutrino oscillations with unprecedented precision. About 300 scientists from more than 50 institutions in Brazil, Italy, Paraguay, Spain, Switzerland, the United Kingdom and the United States, including CERN, work on this research.

The SBN Program incorporates three different liquid-argon time projection chamber detectors to detect neutrinos at different distances from the target facility that produces the neutrino beam for the measurements: SBND 110 meters away, MicroBooNE 470 meters away and ICARUS 600 meters away.

Installation of a wire plane in the neutrino detection system for the Short-Baseline Near Detector. Photo: Ryan Postel, Fermilab

As neutrinos travel this distance, they could transform into a possible fourth type of neutrino, the sterile neutrino. This particle, if it exists, does not interact with ordinary, atomic matter, making it extremely difficult to detect. However, with three detectors at various distances from the target, scientists can check whether neutrinos transform, or oscillate, into each other on their way to the farthest detector. Any deviation from predictions made with the standard three-neutrino model could hint at the existence of a sterile neutrino or other new physics.

Because SBND is the detector closest to the beam source, it will provide information on the original composition of the neutrino beam. Knowing the composition will give researchers a baseline measurement of the neutrino types present in the beam before they travel and reach the next two detectors. Scientists can then compare data between the three detectors and make observations based on the types of neutrino interactions in each detector down the line.

“By comparing what we see close to the source in the near detector with what we see in the far detector, we will understand if any oscillation is happening or not,” said Ornella Palamara, a neutrino scientist at Fermilab and co-spokesperson for the SBND collaboration.

Detecting these oscillations will answer the long-standing question about the existence of a possible fourth type of neutrino. A discrepancy in the amount of a neutrino flavor detected from one detector to the next would provide evidence for the existence of sterile neutrinos.

More science goals

The search for the sterile neutrino is not the only goal of the programme. According to Palamara, SBND will also collect a very large amount of data on neutrino interactions with argon. Because argon has a relatively heavy nucleus, the interaction of a neutrino with its protons and neutrons is complex, and data is currently limited.

“We don’t have too many data on neutrino-argon interactions, so the SBN Program will be a generational advance into this,” she said. Other neutrino experiments that use liquid argon, such as the international Deep Underground Neutrino Experiment, hosted by Fermilab, will benefit from the knowledge gained by the SBN Program.

Thousands of wires spaced 3 millimeters apart make up each of the SBND planes that will detect signals created by neutrinos. Photo: Ryan Postel, Fermilab

The third goal of the program is to search for beyond-the-standard model physics. While the existence of sterile neutrinos is one explanation for anomalies seen in previous neutrino experiments, other theoretical models also provide potential explanations and will be put to the test with SBND and the SBN Program.

“We are working in close collaboration with many theorists,” Palamara said. “From this collaboration between us experimentalists and them, we will be able to test many of these models.”

assembly process

Putting the detector together has been no small feat. Pieces of the detector were assembled all around the world, including the United Kingdom, Switzerland and Brazil, and had to be delicately transported to Fermilab. Along with the parts, teams from all over the world who were needed to assemble SBND also had to navigate traveling to Fermilab during the pandemic. Despite these challenges, working on the detector has been a rewarding experience for those involved.

“We had such a great group of people with a lot of positivity and just general camaraderie while working together in what was not the easiest of times,” said Nicola McConkey, a scientist at the University of Manchester and co-lead in charge of the detector assembly. “Working with such a great, diverse group of people to put the detector together was just wonderful.”

McConkey has been part of SBND since the early days of the project and has been able to see the development of the pieces from the UK from their manufacturing to installation in the detector.

“It was really helpful to see how everything was built,” she said. “That gave me a lot of insight into how it should go together and the potential problems that we had to watch out for.”

The assembly took place inside a cleanroom constructed with yellow plastic panels to keep the assembly process free of dust and harmful ultraviolet light. The team celebrated as they reached milestones, such as installing the two anode wire planes on either side of the detector and taking the protective covers off of the cathode plane.

“It’s been really nice seeing things that we only saw in models actually in existence,” McConkey said.

Nicola McConkey is the co-lead in charge of the assembly of the neutrino detection system for SBND. Detector components were assembled all around the world and had to be delicately transported to Fermilab. Photo: Ryan Postel, Fermilab

Final touches

The last parts to be assembled were the light detection systems. They will capture the scintillation light that is produced when neutrinos interact with argon atoms. Traditional photomultiplier tubes are being used along with new silicon-based devices, called ARApuca, which trap photons with filters.

“Photons, when entering this device, are not able to get out because of the cutoff of the filter,” said Ana Machado, who designed the ARAPUCA technology and has overseen the manufacture of the devices for SBND. “After some reflections, the photons are detected by silicon photomultipliers.”

SBND will use a modified design of the original ARAPUCA technology, called X-ARAPUCA. SBND will be the first detector in which neutrino interactions will be detected with this upgraded technology. X-ARAPUCAs will also be deployed in the detectors for the Deep Underground Neutrino Experiment. Installing and using the new devices in SBND will serve as an important test for their use in DUNE.

The next step will be to move the assembled neutrino detection system to the detector hall and lower it into the cryostat for SBND — the vessel that will house the system together with 112 tons of liquid argon. The cryostat will keep the argon at extremely cold temperatures to maintain it in its liquid state.

The SBND plans to have the full detector ready for commissioning in the summer of 2023.

Written by Emily Driehaus

Source: Fermi National Accelerator Laboratory


Leave a Reply

Your email address will not be published. Required fields are marked *